![]() ![]() Debian based distribution usually ships with UFW Firewall package. On the next step start or restart DNSMASQ daemon and run netstat command to get a list of ports that the server is listening. Use the following variables for Debian Netinstall mirrors and architectures. # cd /srv/tftp/Īlso it may be necessary to make all files in TFTP directory readable for TFTP server. Once, you download file, extract archive at the same time (this procedure describes only for 64-bit but the same procedure applies for other system architectures). Go to a offical page mirror of Debian Netinstall – Network boot section and grab the following files depending on your system architecture that you want to install it on your clients. First, change your current working directory path to TFTP Root location defined by the last configuration statement ( /srv/tftp system path ). Now it’s time to download Debian Network Boot files. Step 2: Download Debian Netboot Files and Open Firewall ConnectionĤ. tftp-root – Use /srv/tftp is the location for Debian netboot files.enable-tftp – Enables the build-in TFTP server.Other values types can be: PC98, IA64_EFI, Alpha, Arc_x86, Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI. pxe=service – Use x86PC for 32-bit/64-bit architectures and enter a menu description prompt under string quotes.pxe-prompt – Leave it as default – requires F8 key strike to enter menu 60 with seconds wait time.dhcp-boot – Leave it as default but replace the IP statement with your server IP Address.dhcp-range – Replace it with your network IP range defined by your network mask.domain – Replace it with your domain name.interface – The network interface that the server should listen.Pxe-service=x86PC, "Install Debian 7 Linux from network server 192.168.1.100", pxelinux #pxe-service types: x86PC, PC98, IA64_EFI, Alpha, Arc_x86, Intel_Lean_Client, IA32_EFI, BC_EFI, Xscale_EFI and X86-64_EFI Use the following excerpt for DNSMASQ configuration file as described below. The above backup process consisted on renaming the main configuration file, so the new file should be an empty one. First create a backup of the main configuration and then start editing nf file by issuing the following commands. Once DNSMASQ package installed, you can start editing its configuration file. Once the Static IP Address has been configured run the following command from root account or using a user with root powers to install DNSMASQ server. On first hand, after you install Debian Server assure that your system uses a Static IP Address, because, besides network booting, will also provide DHCP service for your entire network segment. Step 1: Install and Configure DNSMASQ Serverġ. Once the PXE server is up and running you can instruct all your clients machines to directly boot from network, with the specifications that your clients must own a network card that supports network booting, which can be enabled from BIOS under Network Boot or Boot Services option. Debian 7 Network Installation on Client MachinesĭNSMASQ is a lightweight network infrastructure server which can provide crucial network services such as DNS, DHCP and Network Boot, using a build-in DNS, DHCP and TFTP server. ![]() Wget -O /usr/lib/php5/20100525+lfs/ioncube_loader.soĮcho "zend_extension = /usr/lib/php5/20100525+lfs/ioncube_loader.so" > /etc/php5/apache2/conf.d/ioncube.This tutorial will guide you on how you can install Debian 7 ( Wheezy) directly from a network location using DNSMASQ as a PXE Server ( Preboot eXecution Environment), in case your server doesn’t provide any method to boot from a CD/DVD/USB media drive or it just can operate with an attached monitor, keyboard and mouse. Touch /var/www/bin/wkhtmltoimage-armv5telĬhmod +x /var/www/bin/wkhtmltoimage-armv5tel ![]() Touch "/var/www/bin/wkhtmltopdf-armv5tel"Ĭhmod +x "/var/www/bin/wkhtmltopdf-armv5tel" PHP=$(dpkg -l|grep php|grep 5.4.4|awk '')Ĭp config/init.d/voipmonitor /etc/init.d/ ![]() Wget -O /etc/apt/preferences.d/preferences Here you can download various images for dreamplug:Īpt-get install build-essential subversion libvorbis-dev libpcap-dev apache2 php5-mysql php5-gd mysql-server unixodbc-dev libapache2-mod-php5 php5-gd php5-mysql php5 php5-cli apache2 libapache2-mod-php5 tshark mtr mysql-server php5-mcrypt librsvg2-bin libmysqlclient-dev libsnappy-dev gcc-4.7 g++-4.7īecause our current ioncube loader does not support php 5.4 you need to downgrade the php 5.3 firstĮcho "deb squeeze main contrib non-free" > /etc/apt/sources.listĮcho "deb squeeze/updates main contrib non-free" > /etc/apt/sources.list ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |